loading
| Availability: | |
|---|---|
◀◀ Key Selling Points ▶▶
Precision Measurement
Measures temperature (-30°C to +70°C) and humidity (0–100% RH) with laboratory-grade accuracy.
Fast response time: Adapts to environmental changes within seconds for real-time monitoring.
Industrial Durability
IP67-rated enclosure: Resists dust, water, and extreme temperatures (-30°C to +70°C).
Reinforced design with anti-deformation housing for stability in high-pressure or corrosive environments.
Versatile Installation
Supports multiple mounting options: Fiberglass panels, thin plates, or edge fixtures.
Compact and lightweight: Easy integration into HVAC systems, pipelines, or machinery.
LoRaWAN® Connectivity
Long-range wireless transmission: Up to 15 km in open areas, ideal for large industrial facilities.
Seamless integration with gateways (e.g., UG67) for scalable IoT networks.
Low Maintenance
Long battery life: Optimized power efficiency for years of operation.
Sterile air purge (if applicable): Reduces contamination in sensitive environments like labs or cleanrooms.
◀◀ Product Parameters ▶▶
| Category | Specifications |
|---|---|
| Measurement Range | - Temperature: -30°C to +70°C - Humidity: 0–100% RH |
| Accuracy | - Temperature: ±0.3°C - Humidity: ±3% RH |
| Response Time | <1.5 seconds (typical) |
| Durability | - IP Rating: IP67 - Material: Fiberglass-reinforced housing |
| Connectivity | - Protocol: LoRaWAN® - Range: 15 km (rural), 2 km (urban) |
| Power | - Battery: Long-life lithium (5+ years) - Low-power sleep mode |
◀◀ Application Scenarios ▶▶
◆◆ Applications:
Precision Agriculture: Optimize irrigation and fertilization based on real-time soil data.
Greenhouse Management: Monitor microclimates to boost crop yields.
Environmental Research: Track soil health and salinity in ecological studies.
Smart Irrigation Systems: Automate water usage to reduce waste.
Urban Farming: Ensure optimal growing conditions in controlled environments.
◆◆ Surface installation
Clear away any stones. Pre-form holes in very hard soils before insertion.
Push the sensor into the soil until the rods are fully inserted. Ensure good soil contact.
If you feel strong resistance when inserting the sensor, you have probably hit a stone. Stop, and re-insert at a new location.
Note: The sensor is suitable for soil surface temperature measurements.
◆◆ Installing at depth
Make a 45mm diameter hole, preferably at about 10° to the vertical using a auger.
Push the sensor into the soil until rods are fully inserted. Ensure good soil contact.
Fill and repack the hole with soil.
◆◆ Alternatively
Dig a trench, and install horizontally.
