Cup Type Wind Speed And Direction Sensor

The instrument adopts advanced and reliable integrated circuit which designed to complete the internal signal measurement part.Have the characteristics of simple operation, easy to use. Used to realization of environmental wind speed and direction measurement. This device has two signal output modes (2 choose 1, can not output at the same time). One is RS485 interface output mode based on Modbus protocol; Another is 4-20mA current signal output mode.

When using RS485 output, multiple devices can be connected to a bus to form a measurement network. Each device can set its own address and baud rate (each device must have the same baud rate when networking). Provide test software and detailed instruction manual.

BGT-FS1 is a cost effective mechnical Wind Speed Meter.

The reed switch is working by magnetic steel sensing, output relative electric pulse signals. 

Usually applied in meteorological stations；

Monitoring wind in agricultural fields；

Monitoring wind at the top of the tower crane;

The top floors of buildings, etc.

.

BGT-FX1 Wind Direction Sensor

The interior of the wind direction sensor uses a precision angle sensor, and selects the low inertia ABS wind vane to respond to the wind direction with good dynamic characteristics. The product has the advantages of good linearity, high precision, no dead spots, strong anti-lightning ability, convenient observation, stable and reliable.

It can be widely used in the fields of weather, ocean, environment, airports, ports, laboratories, agriculture, industry and transportation.

Application:

Further details , please contact us !