7
standard configurations
4G / LoRa
NB-IoT / Satellite
telemetry options
Solar +
battery
unattended operation
Why Continuous River Monitoring Matters
Manual gauge readings are infrequent, inconsistent and expensive to sustain. Flood peaks rise and fall between two site visits, and when no continuous record exists, there is no evidence for the decisions that follow.
01
Manual readings are infrequent and costly to sustain.
Flood peaks occur between two site visits — no continuous record.
Level and flow data sit in separate systems, so discharge is estimated.
Remote reaches: no mains power, unreliable site access.
Data arrives days late — after the operational window closed.
A modern hydrological station removes all five problems at once: it measures unattended, stores data locally when the network drops, and delivers level, velocity, discharge and rainfall to one platform in near real time.
Seven Solutions at a Glance
Each configuration is a complete, field-proven system — sensor, telemetry, power and platform — rather than a single instrument. Choose by parameter, site condition and reporting requirement.
One Station, Four Layers
A standard river station is assembled from four layers — sensing, acquisition, communication, and power and enclosure. All of it reports to one cloud platform.
01 SENSING
Measurement
Radar / ultrasonic water level sensor
Doppler velocity sensor or 3-in-1 flow meter
Tipping-bucket rain gauge
02 ACQUISITION
RTU / Data Logger
Time-stamps every reading
Applies threshold logic locally
Buffers data during outages
03 COMMUNICATION
Telemetry
4G as default
LoRa / NB-IoT for low power
Satellite where cellular is weak
04 POWER & ENCLOSURE
Field Package
Solar panel + battery
Sealed enclosure
Bank, bridge pier or well head mounting
Sensor → RTU → Platform → Alarm
Readings are time-stamped at the RTU: a temporary network outage does not create gaps — data is buffered locally and back-filled once the link returns. Threshold rules run on both the RTU and the platform.

Where These Stations Are Deployed
Site conditions we design for: no mains power, no reliable cellular coverage, high humidity, seasonal flooding of the installation itself, and lightning exposure in open catchments.

River gauging stations and hydrological cross-sections.

Canal offtakes and irrigation delivery networks.

Remote ungauged reaches with solar-only power.

Groundwater monitoring wells and well fields.
Monitoring Parameters by Solution
Match a system to your reporting requirement instead of over-specifying. Published as an HTML table — not an image — so it stays indexable.
| Solution | Level | Velocity | Discharge | Rainfall | Water temp. | Groundwater |
| River Water Level Monitoring System | ● | |||||
| River Flow Monitoring System | ● | ● | ● | |||
| River Water Level & Flow Monitoring System | ● | ● | ● | |||
| Remote Hydrological Station | ● | ● | ● | |||
| Canal Water Level & Flow Monitoring System | ● | ● | ● | |||
| Groundwater Level Monitoring System | ● | ● | ||||
| Remote Water Resources Monitoring System | ● | ● | ● | ● |
Four Questions Decide the Specification
A standard river station is assembled from four layers — sensing, acquisition, communication, and power and enclosure. All of it reports to one cloud platform.
01 · Power
Solar with battery autonomy, or mains where available.
02 · Environment
Enclosure rating, lightning protection and mounting method.
03 · Accuracy & range
Sensor selection follows from the cross-section and expected stage range.
Field Package
Reporting only, or integration into a wider system via API / MQTT / Modbus.
Answer those four and the configuration is largely determined. Our engineers return a sized bill of quantities, typically within 3 working days of receiving the site information.
Frequently Asked Questions
How long does the station run without mains power?
Stations are solar powered with battery autonomy sized to the site. Exact autonomy depends on the sampling interval and telemetry mode — we confirm it against your configuration.
What happens if the cellular network drops??
How is discharge calculated?
Can the data go into our existing system??










